18 months guarantee for all components not subject to specific wearing

Additional wearing-independent warranty terms on sensors, thermocouples, batteries with 6 – 18 months running time

10 YEARS ecom WARRANTY on:
– Aluminium housing
– Free instrument firmware update (made along with instrument check, maintenance or repair)
– Re-supply of spare parts

Gas cooler with electronic condensate monitoring
(by NOx/SOx measurement due to increased water-solubility => “dry cooling” of sampled gas)

Probe for gas sampling (standard)

Probe for gas sampling, heated (for integral soot measurement)

Heated sampling system (e.g. for labor measurements)

NOx/SOx special tubing with PTFE inner coating
(by NOx/SOx measurement)
NOx/SOx special tubing with PTFE inner coating
(by NOx/SOx measurement)
NOx/SOx special tubing with PTFE inner coating
(by NOx/SOx measurement)
(NOx/SOx special tubing with PTFE inner coating
(by NOx/SOx measurement)

Heated tubing (in connection with heated gas sampling system)

Bluetooth remote monitor (ecom-R)
– not possible in connection with WiFi option, Bluetooth remote monitor (ecom-R)

Remote monitoring via smartphone (iOS resp. Android App) via WiFi
– not possible in connection with Bluetooth option, remote monitoring via smartphone (iOS resp. Android App)

Wireless radio monitoring (highest coverage)

PC software (free of charge) – data transfer via connection cable

PC software (free of charge) – data transfer via SD card

PC software (free of charge) – data transfer via Bluetooth (not possible in conection with WiFi option)

Smartphone connection – data transfer via WiFi (not possible in connection with Bluetooth option) – ecom Remote Monitor App (iOS + Android) free of charge

Conversion of NO2 into NO and measurement of up to 1.000 ppm by conversion in NOx value; no original NO2/NOx measurement possible with CLD.

0-2000 ppm also alternatively possible.

TRGI accessories (tubings, quick-fittings, various test stopples, one-pipe counter cap, connection piece with safety valve…)

Measurement data recording (memorization + data logging)

Measurements at gas heatings and oil-fired plants (with soot pump) as well as those fired by solid fuel types

For all heating plants – incl. integral soot measurement, especially comfortable for oil-fired plants (no soot pump required)

Nozzle pressure check
Measurement of device connection pressure

– Tightness checks acc. to TRGI (150 hPa)
– Stress test acc. to TRGI (1 bar)
– Leakage rate measurement in the course of suitability test  acc. to TRGI – Tightness checks acc. to TRGI (150 hPa)
– Stress test acc. to TRGI (1 bar)
– Leakage rate measurement in the course of suitability test acc. to TRGI

– Tightness check acc. to TRF (150 hPa)
–  Stability test acc. to TRF (1 bar) – Tightness check acc. to TRF (150 hPa)
–  Stability test acc. to TRF (1 bar)

– Tightness check of pressed connections (6 bar)
– Tightness check acc. to DIN EN 806-4  – Drinking water resp. air pressure – (11 bar)

– Tightness check acc. to DIN 18380 (2.5 or 3 bar; acc. to set pressure of safety valve)

– acc. to DIN 1610

– Gas pressure check (±80 hPa to 8 bar)
– Differential pressure at intercooler (±20 to 700 hPa)
– Exhaust gas pressure (±5 to 120 hPa)
– Differential pressure at BlowBy filter (5 to 50 hPa)
– Crank case pressure (-5 to 100 hPa)

Probe pre-filter made out of sinter metal

Filtering plate (for solid fuel types measurement)
Positioning at aluminium-framed transport case

Filtering case (for solid fuel types measurements)

Gas washing bottle (elimination of solid particles in sampled gas)
– not suitable by NO2/SO2 measurement due to water-solubility
of these particles
– gas cooler required (for subsequent gas drying)

Ring slot multi-hole probe (for measurement of oxygen content in the combustion air of room-independent combustion plants)

Universal CO multi-hole probe (for measurement of CO concentration within the frame of safety-related checks of gas-fired plants)

Tubing for differential pressure measurement up to 100 hPa

T-Room stick for determination of ambient temperature at analyser

T-Room probe, tip length 260 mm  – i.a. determination of sucking temperature by concentric exhaust plants

Contact sensor – for differential temperature mesurement of water (when entering and leaving the heating system)

Dynamic pressure measurement in exhaust gas – option with dynamic pressure probe

8-channel analog output box (for external data evaluation in V/mA)

Instrument internal heating

according to EN 50379-2 (fulfills the requirements by law-regulated measurements and assessments)

EXTREMELY accurate.
3-point climatic chamber calibration for sensors´ temperature compensation for EXACT measurement results

EXTREMELY efficient.
Up to 5-time higher pump performance (2.6 l/min)

EXTREMELY safe.
– automatic CO switch-off by concentration overexposure
– no measurement interruption (CO sensor purge with fresh air)

EXTREMELY robust.
– thanks to ultralight but resistant aluminium housing
– thanks to aluminium-framed transport case (when applicable)

EXTREMELY broad reach.
– thanks to data transfer via WiFi/Bluetooth
– thanks to remote monitor/command features

EXTREMELY cool.
– constant drying by 5°C via gas cooler
– perfect gas preparation by NOx/SOx measurement

EXTREMELY loss-free.
Quick, effective gas transport i. a. for accurate NO2/SO2 measurement provided by sampling tubing with PTFE sleeve with restricted diameter

EXTREMELY complete.
ecom products are always designed and quoted with the complete equipment needed for a ready-to-measure operation and they furthermore come with: additional consumables (e.g. spare printer paper roll/filter) and free downloadable PC software

Resolution: 0.1 Pa, accuracy: ±0.3 Pa or 3 % of measurement value

Resolution: 0.01 hPa, accuracy: < 3% of measurement value

Resolution: 0.01 hPa, accuracy: ±0.5 hPa or 1% of measurement value

Resolution: 0.01 hPa, accuracy: 1% of measurement range end value

Resolution: 0.1 hPa, accuracy: < 3% of measurement value (according to  pressure sensor type installed: higher)

Resolution: 0.1 hPa, accuracy: 0.3% of measurement end value

Resolution: 0.001 bar, accuracy: 0.5% of measurement end value

Resolution: 0.01 bar, accuracy: 0.5% of measurement end value

Resolution: 0.01 bar, accuracy: 0,5% of measurement end value